Load data for 10.75 x 68 + .422 | 240gr | AERO SB,- smax:12.93

Recommended Powder(s): Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.422 \| 240gr \| AERO SB,- smax:12.93
Bullet Weight:	240gr \| 15.6g
Bullet Diameter:	0.422" \| 10.72mm
Bullet Length:	1.080" \| 27.4mm
Caliber:	10.75 x 68 load data
Case Length (l3):	2.670" \| 67.8mm
Cartridge Length (C.O.L.):	3.141" \| 79.8mm
Seated Depth:	0.609" \| 15.5mm
Shank Seated Depth:	0.609" \| 15.5mm
Case Capacity:	95.0 Grains of Water \| 6.17 cm³
Primer Size:	Large Rifle Magnum (LRM)
Max. allowed Pressure:	47863 psi \| 3300 bar
LID:	LID_B135_C1313
Last updated:	2025-01-01

Load data for 74 loads in caliber 10.75 x 68 with .422 | 240gr | AERO SB,- smax:12.93 bullet and 37 powders such as Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	89%	42627	89%	**49	100%
ADI AR 2219	<<locked>>	92%	43018	90%	**85	97%
Accurate 2015	<<locked>>	97%	40103	84%	**16	98%
[Accurate 2460]*	<<locked>>	97%	42946	90%	**52	94%
Accurate 2495	<<locked>>	97%	30951	65%	**28	95%
[Accurate 2520]*	<<locked>>	97%	34853	73%	**57	92%
Alliant AR-Comp	<<locked>>	97%	36114	75%	**03	99%
Alliant Reloder-10x 👍	<<locked>>	95%	42685	89%	**79	99%
Alliant Reloder-7 👍	<<locked>>	88%	42482	89%	**16	99%
Baschieri & Pellagri 106	<<locked>>	91%	42598	89%	**74	97%
[Hodgdon Benchmark]*	<<locked>>	97%	42119	88%	**87	93%
[Hodgdon CFE BLK]*	<<locked>>	87%	42627	89%	**54	92%
Hodgdon H322	<<locked>>	97%	41089	86%	**49	96%
Hodgdon H335	<<locked>>	93%	42685	89%	**72	95%
Hodgdon H4198	<<locked>>	89%	42598	89%	**74	96%
[IMR 3031]*	<<locked>>	97%	30995	65%	**82	93%
IMR 4198 👍	<<locked>>	93%	42888	90%	**30	100%
[Lovex D073.4]*	<<locked>>	95%	43004	90%	**43	94%
[Lovex D073.5]*	<<locked>>	97%	42873	90%	**56	94%
Lovex S053	<<locked>>	84%	42728	89%	**61	100%
Norma 200 👍	<<locked>>	91%	42627	89%	**66	100%
[Norma 202]*	<<locked>>	97%	34403	72%	**25	93%
ReloadSwiss RS 36	<<locked>>	83%	42946	90%	**13	100%
[ReloadSwiss RS 40]*	<<locked>>	96%	42960	90%	**59	94%
[Rottweil R 901]*	<<locked>>	97%	38072	80%	**70	94%
SNPE Vectan BA6 1/2	<<locked>>	87%	43033	90%	**29	100%
SNPE Vectan SP 10	<<locked>>	92%	42569	89%	**72	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	38406	80%	**11	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	30734	64%	**60	92%
[Somchem S321]*	<<locked>>	97%	41655	87%	**49	92%
Somchem S335	<<locked>>	97%	36738	77%	**11	95%
Vihtavuori N120	<<locked>>	92%	42656	89%	**07	100%
Vihtavuori N130	<<locked>>	97%	42612	89%	**13	99%
Vihtavuori N133	<<locked>>	97%	34461	72%	**69	96%
[Vihtavuori N140]*	<<locked>>	97%	32677	68%	**52	92%
[Vihtavuori N530]*	<<locked>>	97%	41408	87%	**33	92%
[Winchester 748]*	<<locked>>	97%	40901	85%	**52	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32677	68%	**65	100%
[ADI AR 2219]*	<<locked>>	81%	29167	61%	**87	91%
[Accurate 2015]*	<<locked>>	81%	23960	50%	**52	92%
[Accurate 2460]*	<<locked>>	90%	33649	70%	**82	90%
[Accurate 2495]*	<<locked>>	87%	21683	45%	**78	90%
[Accurate 2520]*	<<locked>>	94%	31865	67%	**88	90%
[Alliant AR-Comp]*	<<locked>>	81%	21625	45%	**06	92%
Alliant Reloder-10x	<<locked>>	81%	27006	56%	**51	95%
Alliant Reloder-7	<<locked>>	81%	34272	72%	**62	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30414	64%	**38	93%
[Hodgdon Benchmark]*	<<locked>>	91%	35462	74%	**62	90%
[Hodgdon CFE BLK]*	<<locked>>	84%	38101	80%	**69	90%
[Hodgdon H322]*	<<locked>>	85%	27963	58%	**54	90%
[Hodgdon H335]*	<<locked>>	83%	30008	63%	**06	90%
[Hodgdon H4198]*	<<locked>>	81%	33504	70%	**97	93%
[IMR 3031]*	<<locked>>	92%	26310	55%	**57	90%
IMR 4198	<<locked>>	81%	29733	62%	**67	97%
[Lovex D073.4]*	<<locked>>	89%	34011	71%	**75	90%
[Lovex D073.5]*	<<locked>>	90%	33692	70%	**82	90%
Lovex S053	<<locked>>	81%	39566	83%	**11	100%
Norma 200	<<locked>>	81%	30458	64%	**26	97%
[Norma 202]*	<<locked>>	92%	29370	61%	**03	90%
ReloadSwiss RS 36	<<locked>>	81%	39900	83%	**61	100%
[ReloadSwiss RS 40]*	<<locked>>	87%	32561	68%	**49	90%
[Rottweil R 901]*	<<locked>>	89%	30052	63%	**93	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	36970	77%	**41	100%
[SNPE Vectan SP 10]*	<<locked>>	82%	30037	63%	**10	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	29472	62%	**28	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	93%	27412	57%	**75	90%
[Somchem S321]*	<<locked>>	92%	35882	75%	**41	90%
[Somchem S335]*	<<locked>>	87%	26963	56%	**92	90%
Vihtavuori N120	<<locked>>	81%	30719	64%	**93	100%
[Vihtavuori N130]*	<<locked>>	81%	25730	54%	**62	94%
[Vihtavuori N133]*	<<locked>>	84%	23438	49%	**87	90%
[Vihtavuori N140]*	<<locked>>	93%	29167	61%	**70	90%
[Vihtavuori N530]*	<<locked>>	93%	36608	76%	**44	90%
[Winchester 748]*	<<locked>>	93%	35911	75%	**48	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.